Act 1 - A1020 (2.0 µm)
"ACT 1 Military Field Programmable Gate Arrays (Preliminary)," ACT
Family Field Programmable Gate Array Databook, April, 1990, p. 1-35
Overall Derating
Note: "Best-case" reflects maximum operating voltage, minimum operating temperature, and best-case processing. "Worst-case" reflects minimum operating voltage, maximum operating temperature, and worst-case processing. Best-case derating is based on sample data only and is not guaranteed.
Factor ( x typical)
Best-case 0.40 Worst-case 1.38
Voltage Derating: 14%/V
Factor ( linear)
4.5V 1.07 5.0V 1.00 5.5V 0.93
Temperature Derating: 0.26%/°C
Based on junction temperature
Factor ( linear)
-55 °C 0.78 +25 °C 1.00 +125 °C 1.24
Act 1 - A1020A (1.2 µm)
"ACT 1 and Act 2 Military Field Programmable Gate Arrays" ACT
Family Field Programmable Gate Array Databook, April, 1992, p. 1-141
Overall Derating
Note: "Best-case" reflects maximum operating voltage, minimum operating temperature, and best-case processing. "Worst-case" reflects minimum operating voltage, maximum operating temperature, and worst-case processing. Best-case derating is based on sample data only and is not guaranteed.
Factor ( x typical)
STD Best-case 0.37 Worst-case 1.79 -1 Best-case 0.37 Worst-case 1.49
Voltage Derating: 14%/V
Factor ( linear)
4.5V 1.07 5.0V 1.00 5.5V 0.93
Temperature Derating: 0.26%/°C
Based on junction temperature
Factor ( linear)
-55 °C 0.78 +25 °C 1.00 +125 °C 1.24
Act 2 - A1280 (1.2 µm)
"ACT 1 and Act 2 Military Field Programmable Gate Arrays" ACT
Family Field Programmable Gate Array Databook, April, 1992, p. 1-141
Overall Derating
Note: "Best-case" reflects maximum operating voltage, minimum operating temperature, and best-case processing. "Worst-case" reflects minimum operating voltage, maximum operating temperature, and worst-case processing. Best-case derating is based on sample data only and is not guaranteed.
Factor ( x typical)
STD Best-case 0.35 Worst-case 1.60
Voltage Derating: 14%/V
Factor ( linear)
4.5V 1.07 5.0V 1.00 5.5V 0.93
Temperature Derating: 0.26%/°C
Based on junction temperature
Factor ( linear)
-55 °C 0.78 +25 °C 1.00 +125 °C 1.24
RH1020 (1.0 µm)
Some measured data on RT1020's (w/ RH1020 die inside).
200 buffers
Static Timing Analysis
25 °C, +5V
Min = 395 ns
Typ = 983
Max = 1037Sample Data
1.7 to 5.5V
3.0 to 5.5V
4.5 to 5.5V
Change (%) of tPD vs. Change in Voltage
Note: Double the numbers to get delta tPD/voltVoltage tPLH tPHL 4.5V 9.1 5.8 5.0V 5.5V 6.8 4.3
Home - NASA Office of Logic Design
Last Revised:
November 01, 2003
Digital Engineering Institute
Web Grunt:
Richard Katz
